GARRETT POWERMAX PERFORMANCE CHARGE COOLER BMW F8X M2C / M3 / M4 S55
Garrett Powermax direct fit performance air-to-liquid intercooler for the 2015+ BMW M3 and M4 boasts a 47% larger core with dual pass coolant flow to help reduce intake manifold temperatures by an average of 10 °F. Optimized end tanks improve air flow through the core.
An average increase of 12.4 horsepower and 4.9 lb-ft of torque were measured during back to back dyno pulls. This direct fit performance intercooler installs in 1.5 hours and reuses the stock bolts, hoses, and clamps.
Replace heat with horsepower. Garrett’s all-new performance intercooler for S55-equipped cars boasts a 47% larger core with dual pass coolant flow to help reduce intake manifold temperatures by an average of 10°F.
Garrett’s S55 cooler is an air-to-water design with CFD optimized, cast aluminum end tanks to improve air flow through its more voluminous core.
This plug and play solution offers an average gain of 12.4 horsepower and 4.9 lb-ft of torque, but that’s really only half of the benefit. Under load, it’s not uncommon to see horsepower figures drop over time as the engine loses its battle with heat – the Garrett intercooler’s party piece is a testament to its achievements in cooling and ensures their advertised power bump is a sustainable one.
As you’d expect from a name like Garrett, this S55 intercooler is also quite heavily over-engineered, this piece was built to cope with nearly four-figure horsepower numbers without blinking an eye.
- Heavily over-engineered intercooler
- Air-to-Water design
- Cast aluminum end tanks
- Supports up to 980hp
- 47% larger core than stock
- Average Gain of 12.4-2021 hp, 4.9 lb-ft
- OEM fitment, re-uses OEM hardware
- BMW F8X M2C | M3 | M4 (S55) 2015-2020