EVENTURI CARBON FIBER AIR INTAKE AUDI A3 / S3 8V / SEAT LEON CUPRA 5F / SKODA OCTAVIA 5E VRS / VW GOLF MK7 / MK7.5 / GTI / R

999.00 TAX included

The 2.0T MQB Eventuri system uses patent pending carbon fibre housing which provides an aerodynamically efficient airflow path from the filter to the MAF tube. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect, this amazing intake shown a huge 25 extra horsepower on standard 2.0 TSI engine.

Available on backorder

SKU: EVE-2TFSI-CF-INT Categories: ,
Found cheaper?

We`ll reduce price!

Description

EVENTURI CARBON FIBER AIR INTAKE AUDI A3 / S3 8V / SEAT LEON CUPRA 5F / SKODA OCTAVIA 5E VRS / VW GOLF MK7 / MK7.5 / GTI / R

Performance Increase : 16-25hp, 15-22ft-lb

The VAG 2.0 TFSi Eventuri intake has been developed to provide the most efficient and direct airflow path to the turbo. By replacing the OEM Eventuri Patent Pending Venturi housing and coupling this with a smooth duct, we have ensured that the airlfow remains as laminar as possible. Furthermore, the addition of a true cold air feed by adding a scoop to the front grill results in the lowest possible inlet air temperature. The result is an optimised intake system which delivers noticeable performance gains consistently.

The Eventuri Difference

The 2.0 TFSi system uses Patent Pending Carbon fibre Housing which provides an aerodynamically efficient airflow path from the filter to the turbo tube. Not just another cone filter with a heat shield but a unique design which allows airflow to remain laminar and thus improve the turbo efficiency.

The 2.0 TFSi intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Here are the details for each component and the design ethos behind them:

  • Each intake system consists of:
      • Prepreg Carbon Fibre Venturi Housing
      • High Flow Double Cone Air Filter
      • Aluminium Cowl for smooth airflow entry
      • Prepeg Carbon Fibre Intake Duct (also available in plastic)
      • Laser Cut Cold Air Scoop with Surround
      • Laser Cut Stainless Steel Brackets
      • Laser Cut Slam Panel Plate

Carbon Intake Housing and Duct

    • The filter housing comprises of a high flow filter, aluminium cowl, laser cut bracket and the carbon pod itself. The carbon pod shrouds the reverse mounted filter and smoothly shapes the airflow down to the intake tube. This smooth reduction in cross sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack – below is a diagram to show the comparison between our patent pending design and a regular intake system. Further details can be read in the Technology page. The duct channels cold air from the slam panel opening to the filter. By designing the duct to smoothly transition from the rectangular opening at the front to the circular opening for the filter, it allows the airflow to remain as direct and smooth as possible.

Single Duct VS Double Duct

    • During the development of our system we designed and tested both the single duct and also an extended double duct version:

    • Testing showed that the double duct did not produce more power, in fact we could not achieve the same results as we did with our single duct design. This is because the single duct allows for the smoothest and most direct airflow path to the filter and the cross sectional area of the opening is not restrictive for this engine. With the scoop directly in front of the opening there is no chance for warm air to mix with the airflow. Furthermore on the double duct, the airflow has to travel at almost a 90 degree angle from the far side of the grill to then enter the filter housing. A dyno graph comparing the single and double duct can be seen in the Performance tab.

Cold Air Scoop

    • A key feature of our system is the addition of a scoop into the grill which opens up a direct path for cold air to enter the duct. When the bonnet is closed, it prevents a direct air feed to the duct and the only path for cold air to enter is the small gap between the closed bonnet and the top of the grill – or the small slits on the other side of the grill. This means that the intake will draw some air in from the hot engine bay area. With our scoop system – when the car is in motion there is minimal chance for hot air to enter the intake and so the intake temperatures are lower than the OEM airbox. Here is a thermal imaging video of the engine bay showing how cool the intake system is after a good drive.

 

    • This intake system is available in black carbon fibre as well as a range of Kevlar options in Red, Blue or Yellow.

Compatibility:

Audi A3 8V / 8.5V – 12-20 1.8 TFSI – 180
Audi A3 8V / 8.5V – 12-20 2.0 TFSI – 190 / 220
Audi S3 8V / 8.5V – 13-20 2.0 TFSI – 300 / 310
Seat / Cupra Leon 5F – 12-20 1.8 TSI – 180
Seat / Cupra Leon 5F – 12-20 Cupra – 265 / 280 / 290 / 300 / 310
Seat / Cupra Leon 5F – 12-20 Cupra 4 Drive – 300
Skoda Octavia 5E – 13-20 vRS – 220 / 230 / 245
Volkswagen Golf MK7 – 13-17 GTI – 220 / 230
Volkswagen Golf MK7 – 13-17 GTI Clubsport – 265
Volkswagen Golf MK7 – 13-17 R – 300
Volkswagen Golf MK7 – 13-17 R – Estate / SW – 300
Volkswagen Golf Mk7.5 – 17-20 GTI – 230 / 245
Volkswagen Golf Mk7.5 – 17-20 GTI TCR – 290
Volkswagen Golf Mk7.5 – 17-20 R – 310
Volkswagen Golf Mk7.5 – 17-20 R – Estate / SW – 310

 

Additional information

Weight 15 kg
Brand