Latest Products
-
WALBRO MOTORSPORT E85 FUEL PUMP - 450 L/H
€ 182.00 TAX included
-
ALPHA COMPETITION INLET HOSE FOR AUDI S3 8V / TT 8S / GOLF 7 GTI / R / LEON 5F CUPRA
€ 64.99 TAX included
-
RM MOTORS TRANSVERSE STRAIGHT-THROUGH SUPER FLOW PERFORMANCE MUFFLER
€ 219.00 – € 227.80 TAX included
-
WATER PUMP, ENGINE COOLING THERMAL MANAGEMENT MODULE FOR AUDI S3 8V / TT 8S / GOLF 7 GTI / GOLF 7 R / LEON 5F CUPRA 1.8/2.0 TSI EA888.3 MQB
€ 350.00 TAX included
-
TIMING CHAIN KIT FOR 2.0 TFSI EA113
€ 130.00 TAX included
-
- Street Comfort
Products to improve driving and operating comfort - Street Performance
Coilovers for an individual look and to improve driving dynamics on the road - Track Performance
Clubsport & racing suspensions to achieve the fastest possible lap time
For quotation please fill the budget form on our webshop.
- Street Comfort
-
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them in to your requirements.
For quotation please fill the budget form on our webshop.
-
ap coilover kits offer the possibility to adjust drivers the desired lowering accurate to a millimeter for the sporty ambitioned driver. ap offer sporty handling and ideal performance in combination with the maximium lowering.
For quotation please fill the budget form on our webshop.
-
Length: 100mm
Aplication: Radiator / Coolant / Air / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 1000mm
Aplication: Vaccum Lines & Coolant Overflow
Reinforcement: None
Temperature Rated: -60ºC to +180ºC
Material: Peroxide Cured 70 Shore Silicone -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Internal Diameter: 60mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
70mm to 51mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
BMC Complete Washing Kit
(Detergent + Spray)
-
Stripping weight out of your track car? Prefer that clean, uncluttered look without the rear wiper? Then this Rear Wiper Delete kit is for you….
-
This Racingline Performance magnetic fill and drain plugs kit for the front differential will protect your transmission from the increased of metal particles into the lubrification system by catching them via the magnetic section situated at the end of the drain plug.
-
– Direct bolt on
– Built in micro cat
– 100% stainless steel
– Compatible with any O2 sensors
– 90° bent structure for better access -
This Racingline Performance magnetic drain plug fits, as a direct replacement for the OEM plug, on the 1.8 / 2.0 TFSI EA888.3 engines of the Golf 7 GTI / Golf 7 R / Leon 3 Cupra or S3 8P fitted with plastic oil sump. Thanks to its magnetic end, this plug made of aluminum, collects the metal residues present in the lubrication circuit and is designed to withstand multiple disassembly without risk of damage or even breakage like the original poor quality one.
-
The BAR-TEK Dogbone Insert limits drivetrain movement, helping to reduce wheel hopping and torque steering. Especially with tuned engines a must.
-
Sabelt seat sliding runners are made to fit Sabelt and Sparco seats directly and to allow sliding movement backwards and forwards.
-
Reduce temperatures!
- Thermal insulation of manifold/exhaust components
- Reduces engine bay temperature
- 15m x 50mm width (1.6mm thick)
- Material : titanium finish fiberglass
-
This VWR billet MQB oil dipstick is all about detailing, representing stylish detail for your 2.0 T(F)SI engine bay, that’s a great upgrade for the oem plastic dipstick
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised
-Laser etched logo
-Made in UK
-Check the level marks before using -
These NGK high performance iridium IX spark plugs are one of the most popular ugrade on tuned 1.8/2.0TSI EA888.3 MQB engines. One heat range cooler than OEM, it provides great heat transfer and spark stability on cars from stage 2
-
The Forge Motorsport turbo blankets are designed to isolate the radiant heat produced by your turbocharger, to assist in the protection and prolonging of your engine components. This unique design will assist in reducing turbo lag and produce cooler air intake temperatures on your 1.8 / 2.0 TFSI MQB engine.
-
This VWR black anodized, aluminium billet washer bottle cap for the VAG Group engines (see list below) is all about detailing, representing stylish detail for your engine bay, that’s a great upgrade for the oem plastic housing.
-
Technical Information:
Length: 15m
Width: 50mm
Direct heat resistance: 1800F / 1150 degree Celsius
Intermittent heat resistance: 2500F / 1400 degree Celsius
Colour: titanium -
– Direct bolt on
– T6061 high quality aluminium made
– High flow design
– Double seal included
– Black finish -
This warranty-friendly Racingline panel air filter, replace the restrictive factory paper filter with an improved, high flow and reusable lifetime triple-layer Trifoam filter.
It’s really the best panel air filter you can buy for your VAG
-
This Racingline billet brake fluid cap is all about detailing, representing stylish detail for your car engine bay, that’s a great upgrade for the oem plastic cap.
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised
-Laser etched logo -
This VWR billet MQB oil cap is all about detailing, representing stylish detail for your engine bay, that’s a great upgrade for the oem plastic oil cap.
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised
-Laser etched logo -
Technical features
- Panel
- Outside Width 176 (mm)
- Outside Length 290 (mm)
-
This reinforced silicone induction hose fits the 2.0 TFSI EA888.3 engines of the Audi S3 8V / TT Mk3 8S / Octavia 5E VRS. Due to its location, it really improves the looks of the engine compartment and removes any restriction of the OEM plastic hard pipe
-
This VWR black anodized, aluminium billet oil filter housing for 1.8 / 2.0 T(F)SI MQB (see list below) is all about detailing, representing stylish detail for your engine bay, that’s a great upgrade for the oem plastic housing.
-
Don’t let your free flowing intake taper into a small restrictive factory inlet. Upgrade to CTS Turbo High Flow Turbo Inlet and make sure you get the most air flow to your turbo! Made from cast aluminum and precision CNC machined flanges. This part is compatible with any MQB vehicle, regardless of engine displacement or factory turbocharger size.
-
– Direct bolt on
– Dyno proven gain on stage 1 : 8hp
– Aluminium T6061 CNC made -
– Direct bolt on
– High quality 6061 aluminium
– Dyno proven gain on stage 2 : 6.8cv
– High flow design
– O-ring included
– Black finish -
If you have installed an upgrade it can often happen that it does not always work correctly. In most cases, this is an indication that the pump is defective. BAR-TEK experience has shown that this is not the case, but that the control unit is defective and cannot cope with the increased performance of your upgrade pump.
-
This Racingline billet MQB expension cap is all about detailing, representing stylish detail for your 1.4 TFSI / 2.0 TFSI / 2.5 TFSI / 3.0 TFSI / 4.0 TFSI TFSI engine bay, that’s a great upgrade for the oem plastic cap.
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised
-Laser etched logo
-Made in UK -
This Racingline black anodized aluminium billet oil filter housing for DSG 6 / DSG 7 is designed to solve the common issues of the OEM plastic made housing . This direct bolt on accessory will bring your engine bay a great looking and your gearbox a better reliability.
-
This Racingline billet fuel cap is all about detailing, representing stylish detail, that’s a great replacement for the OEM plastic cap.
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised -
- More power and torque
- Maximum flow rate
- Less turbo lag
- Up to 5% additional power
-
This is a direct plug and play exchange for stock mounted part. The manufacturer has designed the stock turbo outlet for reducing the noises of the turbocharger while using a silencer. However, this is not an optimal solution for the air flow at the turbocharger outlet (fresh air pressure side).
-
This plug is manufactured for VW/Audi by NGK.
Set of 4
-
The Racingline turbo muffler delete is a simple and affordable upgrade for any MQB-platform equiped with the 1.8 and 2.0T EA888.3 engines. It replaces the restrictive OEM part with a smooth, turbulence free air path exiting the turbo. The standard part is located on the outlet of the turbo compressor and is simply designed to reduce engine bay acoustics. Whilst it subdues the harmonic noises generated by the turbo, it also adds in disruptive turbulence to the airflow right where you don’t want it.
-
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
DV+ Diverter Valve with TMS advantage.
- Retains the factory solenoid coil for seamless integration
- Replaces plastic valve parts with metal for reliability and strength on chipped engines
- Direct-fit replacement with GFB’s TMS benefits
- Exclusive “pilot-actuated” valve mechanism for rapid response at high boost
-
This Racingline high performance front brake pad kit is a direct replacement for the OEM pads designed to increase the braking performance of your car. These road / sport pads have a high friction level, even when cold, constituting an ideal upgrade, combining comfort and efficiency.
-
Monitor your 0-60mph, 60-130mph, 100-200kmh, 1/4 mile, 1/2 mile performance, and more!
-
Forge Motorsport has developed this turbo muffler delete for the 1.8 and 2.0 TFSI EA888.2 / 3 engine to eliminate the OEM restrictions. This direct bolt on and affordable upgrade will improve the sound, the response and the power of your TFSI engine
-
This Racingline Performance wheel studs and nuts kit allows you to replace the factory bolts for a stud and nut system. This kit, besides having a more modern esthetic, will makes wheels swap for track or winter much easier and faster than using OEM bolts.
Showing 1–50 of 81 results