Showing 1–50 of 77 results
For quotation please fill the budget form on our webshop.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them in to your requirements.
For quotation please fill the budget form on our webshop.
ap coilover kits offer the possibility to adjust drivers the desired lowering accurate to a millimeter for the sporty ambitioned driver. ap offer sporty handling and ideal performance in combination with the maximium lowering.
For quotation please fill the budget form on our webshop.
Length: 100mm
Aplication: Radiator / Coolant / Air / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 1000mm
Aplication: Vaccum Lines & Coolant Overflow
Reinforcement: None
Temperature Rated: -60ºC to +180ºC
Material: Peroxide Cured 70 Shore Silicone
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Internal Diameter: 60mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
This Racingline Performance magnetic oil drain plug will protect your engine from the increased of metal particles into your oil pan by catching them via the magnetic section situated at the end of the plug
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
70mm to 51mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
BMC Complete Washing Kit
(Detergent + Spray)
Stripping weight out of your track car? Prefer that clean, uncluttered look without the rear wiper? Then this Rear Wiper Delete kit is for you….
This Racingline Performance magnetic fill and drain plugs kit for Haldex will protect your transmission from the increased of metal particles into the Haldex lubrification system by catching them via the magnetic section situated at the end of the drain plug. Direct replacement for the OEM plugs.
This Racingline Performance magnetic fill and drain plugs kit for the front differential will protect your transmission from the increased of metal particles into the lubrification system by catching them via the magnetic section situated at the end of the drain plug.
This Racingline oversock, made from high quality foam, slides over the top of the cotton filters of the R600 intake (Golf 7 R / GTI / S3 8V / Leon 3 Cupra) in order to protects debris and dust from settling on the filter, ensuring maximum longevity and efficiency
– Direct bolt on
– Built in micro cat
– 100% stainless steel
– Compatible with any O2 sensors
– 90° bent structure for better access
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
Sabelt seat sliding runners are made to fit Sabelt and Sparco seats directly and to allow sliding movement backwards and forwards.
Reduce temperatures!
This oil filter is a replacement for the genuine filter coming in the Racingline Performance VWR18G700 oil cooler kit for 2.0T EA888.3 MQB. It must be changed about each 20.000km (depending on vehicule setup and use)
Our R600 Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look.
This VWR billet MQB oil dipstick is all about detailing, representing stylish detail for your 2.0 T(F)SI engine bay, that’s a great upgrade for the oem plastic dipstick
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised
-Laser etched logo
-Made in UK
-Check the level marks before using
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
This VWR billet MQB oil cap is all about detailing, representing stylish detail for your engine bay, that’s a great upgrade for the oem plastic oil cap.
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised
-Laser etched logo
This VWR black anodized, aluminium billet washer bottle cap for the VAG Group engines (see list below) is all about detailing, representing stylish detail for your engine bay, that’s a great upgrade for the oem plastic housing.
Technical Information:
Length: 15m
Width: 50mm
Direct heat resistance: 1800F / 1150 degree Celsius
Intermittent heat resistance: 2500F / 1400 degree Celsius
Colour: titanium
Just like it should have come from the factory Our new Golf Mk8 Gas Strut conversion kit lets you get rid of the cheap bonnet prop that the car now comes with.
This warranty-friendly Racingline panel air filter, replace the restrictive factory paper filter with an improved, high flow and reusable lifetime triple-layer Trifoam filter.
It’s really the best panel air filter you can buy for your VAG
This Racingline billet brake fluid cap is all about detailing, representing stylish detail for your car engine bay, that’s a great upgrade for the oem plastic cap.
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised
-Laser etched logo
Technical features
This VWR black anodized, aluminium billet oil filter housing for 1.8 / 2.0 T(F)SI MQB (see list below) is all about detailing, representing stylish detail for your engine bay, that’s a great upgrade for the oem plastic housing.
– Direct bolt on
– Internal diameter 49mm vs 44mm OEM
– T6061 high quality aluminium made
– High flow design
– Black finish
This foam filter is a direct replacement for a used or damaged R600 intake or R600 Cup Edition intake air filter
The installation of a Racingline big brake kit can be problematic due to the lack of space available behind the wheels… In order to provide a reliable and efficient solution, Racingline offers these 5mm thick hub adaptors, designed for perfect fitment over the Racingline discs for your car.
This Racingline billet fuel cap is all about detailing, representing stylish detail, that’s a great replacement for the OEM plastic cap.
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised
This Racingline Performance subframe alignment kit, for MQB platform is installed without any modifications in order to limit the movement of the fixation points on the front and rear subframe. The use of this centering kit will allow to mantain a perfect alignment for a better precision and responsiveness of the chassis.
This is a direct plug and play exchange for stock mounted part. The manufacturer has designed the stock turbo outlet for reducing the noises of the turbocharger while using a silencer. However, this is not an optimal solution for the air flow at the turbocharger outlet (fresh air pressure side).
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
This Forge Motorsport high-flow turbo muffler delete fits without any modifications on the 2.0 TSI EA888 Gen.4 engines fitted to the Golf 8 GTI and Octavia 4 RS in order to remove the particularly restrictive OEM turbo muffler. This turbo muffler delete will therefore bring a significant gain in power, a better turbo response and a more aggressive tone.
This Racingline high performance front brake pad kit is a direct replacement for the OEM pads designed to increase the braking performance of your car. These road / sport pads have a high friction level, even when cold, constituting an ideal upgrade, combining comfort and efficiency.
Monitor your 0-60mph, 60-130mph, 100-200kmh, 1/4 mile, 1/2 mile performance, and more!
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
This oiled pleated cotton made air filter is a direct replacement for a used or damaged R600 / Cup intake air filter. With a giant surface, this cotton air filter doesn’t require any maintenance … that’s a fit and forget option for your R600 intake
This Racingline turbo delete muffler kit replaces the part that joins the turbo outlet to the intercooler pipe on the EA888.4 2.0 TSI engines equipped with the Garrett turbo, such as in the Golf 8 GTI. The standard element, initially designed to reduce turbo noise, is particularly restrictive and the adoption of a turbo muffler delete will provide a significant gain in terms of response time as well as a more aggressive sound.
This Racingline high performance front brake pad kit is a direct replacement for the OEM pads designed to increase the braking performance of the Golf 7 R / Leon 3 Cupra / S3 8V / Octavia VRS and TTS 8S. These road / sport pads have a high friction level, even when cold, constituting an ideal upgrade, combining comfort and efficiency.
Showing 1–50 of 77 results