Showing 1–50 of 66 results
For quotation please fill the budget form on our webshop.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them in to your requirements.
For quotation please fill the budget form on our webshop.
ap coilover kits offer the possibility to adjust drivers the desired lowering accurate to a millimeter for the sporty ambitioned driver. ap offer sporty handling and ideal performance in combination with the maximium lowering.
For quotation please fill the budget form on our webshop.
Length: 100mm
Aplication: Radiator / Coolant / Air / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 1000mm
Aplication: Vaccum Lines & Coolant Overflow
Reinforcement: None
Temperature Rated: -60ºC to +180ºC
Material: Peroxide Cured 70 Shore Silicone
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Internal Diameter: 60mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
This Racingline Performance magnetic oil drain plug will protect your engine from the increased of metal particles into your oil pan by catching them via the magnetic section situated at the end of the plug
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
70mm to 51mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
BMC Complete Washing Kit
(Detergent + Spray)
Stripping weight out of your track car? Prefer that clean, uncluttered look without the rear wiper? Then this Rear Wiper Delete kit is for you….
Dimensions:
– thickness: 12mm;
– spaces between holes: 36 mm
– precision: 0.01mm
– thread 2 x M6
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
This sensor is used to measure air pressure within the boost pipes of your engine, as well as measuring the air temperature
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Direct bolt on
– Built in micro cat
– 100% stainless steel
– Compatible with any O2 sensors
– 90° bent structure for better access
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
Sabelt seat sliding runners are made to fit Sabelt and Sparco seats directly and to allow sliding movement backwards and forwards.
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
Designed specifically for the performance enthusiast, Iridium IX offers extreme ignitability, improved throttle response and superior anti-fouling.
Reduce temperatures!
It has substantially higher load capacity and stiffness to reduce engine movement whilst the double bonded rubber element still isolates engine vibration.
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
Technical Information:
Length: 15m
Width: 50mm
Direct heat resistance: 1800F / 1150 degree Celsius
Intermittent heat resistance: 2500F / 1400 degree Celsius
Colour: titanium
This Racingline billet MQB expension cap is all about detailing, representing stylish detail for your 1.4 TFSI / 2.0 TFSI / 2.5 TFSI / 3.0 TFSI / 4.0 TFSI TFSI engine bay, that’s a great upgrade for the oem plastic cap.
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised
-Laser etched logo
-Made in UK
This Racingline screw-in style billet fuel cap is all about detailing, representing stylish detail for your car, that’s a great replacement for the oem plastic cap !
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised
The R8 coil adapter offers the solution for the common ignition related issues found in the 1.4 TSI engines, such as misfiring, caused by the stock coil packs. With this billet coil adapter, you can install the R8/RS6 coil packs that are taller than the stock units and thus need an adapter for proper fitting.
DV+ Diverter Valve for 1.4 TSI Twin Charged Engines with TMS advantage.
DV+ Diverter Valve with TMS advantage.
Fix those pesky misfires on your Audi or Volkswagen by replacing your ignition coil packs with these red NGK push-in coils found on the Audi R8!
Monitor your 0-60mph, 60-130mph, 100-200kmh, 1/4 mile, 1/2 mile performance, and more!
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
This Racingline Performance wheel studs and nuts kit allows you to replace the factory bolts for a stud and nut system. This kit, besides having a more modern esthetic, will makes wheels swap for track or winter much easier and faster than using OEM bolts.
This 4H-TECH 0A8-Shift is especialy designed for VAG related cars which run a 0A8 transmission like the VW Polo 1.8 GTi and 2.0 WRC and Audi S1. The 0A8-type transmissions are very strong and can cope with high engine torques. The only problem is the original gear shift throw which is too long. This can now be shortened with 4H-TECH 0A8-Shift short shifter system.
APR Ignition Coils are designed to be a direct plug-and-play upgrade to factory coils, and provide greater energy output, ensuring a stronger and more consistent spark.
Showing 1–50 of 66 results