Latest Products
-
WATER PUMP, ENGINE COOLING THERMAL MANAGEMENT MODULE FOR AUDI S3 8V / TT 8S / GOLF 7 GTI / GOLF 7 R / LEON 5F CUPRA 1.8/2.0 TSI EA888.3 MQB
€ 350.00 TAX included
-
TIMING CHAIN KIT FOR 2.0 TFSI EA113
€ 130.00 TAX included
-
CAM FOLLOWER FOR 2.0 TFSI EA113
€ 30.00 TAX included
-
AP SPORTFAHRWERKE COILOVER KIT
-
ST SUSPENSIONS COILOVER KIT
-
- Street Comfort
Products to improve driving and operating comfort - Street Performance
Coilovers for an individual look and to improve driving dynamics on the road - Track Performance
Clubsport & racing suspensions to achieve the fastest possible lap time
For quotation please fill the budget form on our webshop.
- Street Comfort
-
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them in to your requirements.
For quotation please fill the budget form on our webshop.
-
ap coilover kits offer the possibility to adjust drivers the desired lowering accurate to a millimeter for the sporty ambitioned driver. ap offer sporty handling and ideal performance in combination with the maximium lowering.
For quotation please fill the budget form on our webshop.
-
Length: 100mm
Aplication: Radiator / Coolant / Air / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 1000mm
Aplication: Vaccum Lines & Coolant Overflow
Reinforcement: None
Temperature Rated: -60ºC to +180ºC
Material: Peroxide Cured 70 Shore Silicone -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Internal Diameter: 60mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
This Racingline Performance magnetic oil drain plug will protect your engine from the increased of metal particles into your oil pan by catching them via the magnetic section situated at the end of the plug
-
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
70mm to 51mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
– Direct bolt on
– Almuminium CNC made
– Black finish
– Buit in O rings -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
HIGH PRESSURE FUEL INJECTION PUMP CONNECTOR COVER FOR AUDI VW SEAT SKODA WITH EA113 2.0 TFSI ENGINES
Do you want to avoid damage to the pump electrical connector which might be caused by vibration of the hood or by simple carelessness of the owner? Then this product is made for you.
-
BMC Complete Washing Kit
(Detergent + Spray)
-
– Direct bolt on
– Aluminium 6061 made
– Black finish
– Viton O-ring included
– Hardware included -
If you have a VWR K03 Intake System and want to make the conversion of your turbocharger to K04 you will need this.
-
We recommend checking your cam follower:
- every 8-10k km on highly modified cars
- every 20-50k km on non modified cars
-
Stripping weight out of your track car? Prefer that clean, uncluttered look without the rear wiper? Then this Rear Wiper Delete kit is for you….
-
Dimensions:
– thickness: 12 mm;
– spaces between holes: 36 mm
– precision: 0.01 mm
– thread 2 x M6 -
Dimensions:
– thickness: 12mm;
– spaces between holes: 36 mm
– precision: 0.01mm
– thread 2 x M6 -
This Racingline Performance magnetic fill and drain plugs kit for Haldex will protect your transmission from the increased of metal particles into the Haldex lubrification system by catching them via the magnetic section situated at the end of the drain plug. Direct replacement for the OEM plugs.
-
Dimensions:
– thickness: 12 mm;
– spaces between holes: 36 mm
– precision: 0.01 mm
– thread 2 x M6 -
Dimensions:
– thickness: 12 mm;
– spaces between holes: 36 mm
– precision: 0.01 mm
– thread 2 x M6 -
– Easy direct bolt on
– Aluminium T6061 CNC
– Black anodized finish
– 3 x 1/8″ NPT ports (with 2 plugs) for sensors
– Hardware included
– Instructions included
– Made in USA -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
This sensor is used to measure air pressure within the boost pipes of your engine, as well as measuring the air temperature
-
– Direct bolt on
– Aluminium made
– Black finish
– Diameter : 2.5cm -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Direct bolt on
– Built in micro cat
– 100% stainless steel
– Compatible with any O2 sensors
– 90° bent structure for better access -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
Forge silicone throttle hose for 2.0 TFSI EA113 engines has been designed to remove the restricitve construction of the original hose, with a larger smooth internal bore to improve air flows.
-
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
Sabelt seat sliding runners are made to fit Sabelt and Sparco seats directly and to allow sliding movement backwards and forwards.
-
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
Designed specifically for the performance enthusiast, Iridium IX offers extreme ignitability, improved throttle response and superior anti-fouling.
-
Reduce temperatures!
- Thermal insulation of manifold/exhaust components
- Reduces engine bay temperature
- 15m x 50mm width (1.6mm thick)
- Material : titanium finish fiberglass
-
It has substantially higher load capacity and stiffness to reduce engine movement whilst the double bonded rubber element still isolates engine vibration.
-
The Runner Flap Delete Kit allows for the removal of the restrictive intake flappers from the factory intake manifold. The factory intake flappers can be a ubstantial restriction in modified vehicles.
Showing 1–50 of 146 results