Latest Products
-
WATER PUMP, ENGINE COOLING THERMAL MANAGEMENT MODULE FOR AUDI S3 8V / TT 8S / GOLF 7 GTI / GOLF 7 R / LEON 5F CUPRA 1.8/2.0 TSI EA888.3 MQB
€ 350.00 TAX included
-
TIMING CHAIN KIT FOR 2.0 TFSI EA113
€ 130.00 TAX included
-
CAM FOLLOWER FOR 2.0 TFSI EA113
€ 30.00 TAX included
-
AP SPORTFAHRWERKE COILOVER KIT
-
ST SUSPENSIONS COILOVER KIT
-
- Street Comfort
Products to improve driving and operating comfort - Street Performance
Coilovers for an individual look and to improve driving dynamics on the road - Track Performance
Clubsport & racing suspensions to achieve the fastest possible lap time
For quotation please fill the budget form on our webshop.
- Street Comfort
-
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them in to your requirements.
For quotation please fill the budget form on our webshop.
-
ap coilover kits offer the possibility to adjust drivers the desired lowering accurate to a millimeter for the sporty ambitioned driver. ap offer sporty handling and ideal performance in combination with the maximium lowering.
For quotation please fill the budget form on our webshop.
-
Length: 100mm
Aplication: Radiator / Coolant / Air / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 1000mm
Aplication: Vaccum Lines & Coolant Overflow
Reinforcement: None
Temperature Rated: -60ºC to +180ºC
Material: Peroxide Cured 70 Shore Silicone -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Internal Diameter: 60mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
70mm to 51mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
BMC Complete Washing Kit
(Detergent + Spray)
-
– Direct bolt on
– Built in micro cat
– 100% stainless steel
– Compatible with any O2 sensors
– 90° bent structure for better access -
Sabelt seat sliding runners are made to fit Sabelt and Sparco seats directly and to allow sliding movement backwards and forwards.
-
Reduce temperatures!
- Thermal insulation of manifold/exhaust components
- Reduces engine bay temperature
- 15m x 50mm width (1.6mm thick)
- Material : titanium finish fiberglass
-
Technical Information:
Length: 15m
Width: 50mm
Direct heat resistance: 1800F / 1150 degree Celsius
Intermittent heat resistance: 2500F / 1400 degree Celsius
Colour: titanium -
Technical features:
- Panel
- Outside Width/Base Inner Diameter: 223mm
- Outside Length/Base Outside Diameter: 243mm
-
Monitor your 0-60mph, 60-130mph, 100-200kmh, 1/4 mile, 1/2 mile performance, and more!
-
This is a direct plug and play exchange for stock mounted part. The original Turbo Inlet restricts heavily the intake air supplied to the turbocharger.
-
This Forge Motorsport solenoid driven recirculation valve kit is a direct replacement for the OEM valve of the G16E engines fitted in the Toyota Yaris GR ! The kit has been engineered to remedy the failure issues experienced with the OEM valve, but also to provide a great reactivity and boost pressure management without any fault codes or check engine lights.
-
This Forge Motorsport solenoid driven blow off valve kit is a direct replacement for the OEM valve of the G16E engines fitted in the Toyota Yaris GR ! The kit has been engineered to remedy the failure issues experienced with the OEM valve, but also to provide a great reactivity, boost pressure management with an agressive discharge sound.
-
The latest iteration of GFB’s feature-packed electronic boost controller now has the ability to monitor and display your engine’s air/fuel ratio in either Lambda or AFR. By connecting the analogue output of most wideband O2 controllers (i.e. Innovate LC-2, AEM UEGO etc, sold separately) to the G-Force III’s auxiliary input, you can toggle between boost pressure and air/fuel ratio display. Not only does this save you from having to install a separate AFR gauge in your car, it can also save your engine!
-
This Forge Motorsport turbo inlet kit for the Toyota Yaris GR fits as a direct replacement for the OEM elements in order to increase air flow routing from the airbox to the turbo providing about 5 extra horse power on stock engine. Coming as a full kit, ready to install without any modifications, this inlet features a 63mm intake pipe made from high quality aluminium, black silicone hoses and a turbo inlet adapter.
-
A stainless steel silencer with a built-in damper
Can height / width – 130×220 mm
Valve type – Electric Inlet -
A stainless steel silencer with a built-in damper
Can height / width – 130×220 mm
Valve type – Vacuum -
This large volume boost pipe kit, made from high quality aluminum by Airtec, fits without any modification as a direct replacement for the OEM pipes and hoses on the Toyota Yaris GR equipped with the Airtec intercooler. Offering up to 39% increase in volume, these inlet and outlet pipes are designed to optimize air flow to and from the intercooler, in order to improve both response and power on tuned engines.
-
Made of high glossy carbon fiber, this Forge Motorsport air inlet duct fits without modification on the original air box of the G16E engines fitted to the Toyota Yaris GR. Connected to the front bumper, this diffuser will provide a much higher airflow than the original one thanks to its two inlet ports (upper and lower) while significantly improving the aesthetic of the engine bay.
-
This charge pipe kit only fits with original WagnerTuning Intercooler.
-
Installed without any modification to the front of the Toyota Yaris GR, this large volume intercooler, manufactured in the UK by Airtec, has a black finish with a white logo and a 64% larger volume than the OEM intercooler. Delivered ready to install, this kit includes a high quality aluminium intercooler with black reinforced silicone hoses and all the necessary mounting kit.
-
Catback – middle and end silencer TOYOTA YARIS GR 1.6
1,6
2020-
261 km
AWDPipe diameter – 76 mm
-
– Direct bolt on
– Large volume carbon fiber airbox lid
– Washable and reusable air filter
– Carbon fiber intake pipe
– Glossy finish
– Aggressive sound
– Mounting kit included
– Assembly instructions included -
Details stock intercooler:
V = 8,5 L / 519Inch³
A = 913 cm² / 141Inch²Details WAGNERTUNING intercooler:
V = 14,36 L / 876Inch³ (+69%)
A = 1134 cm² / 176Inch² (+24%) -
do88 performance intercooler designed for an easy drop-in-fitment in your Toyota Yaris GR.
-
The Eventuri carbon fiber intake kit for the Toyota Yaris GR was developed to give best airflow to the turbocharger whilst maintaining low intake temperatures. Not just another cone filter with a heat shield but a unique design which invokes the Venturi effect, this Eventuri intake features a large volume airbox, a high flow washable and reusable air filter, a high flow intake pipe and air duct coming with all the required hardware for a direct installation providing an average 9 extra hp on stock engine !
-
This kit is for you with high horsepower goals and want to upgrade to the absolutly best! Just changing to do88 performance intercooler is a big improvement, together with do88 pressure pipe kit the improvement is huge! do88 pressure pipes have considerably better airflow than stock piping.