Showing all 30 results
For quotation please fill the budget form on our webshop.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them in to your requirements.
For quotation please fill the budget form on our webshop.
ap coilover kits offer the possibility to adjust drivers the desired lowering accurate to a millimeter for the sporty ambitioned driver. ap offer sporty handling and ideal performance in combination with the maximium lowering.
For quotation please fill the budget form on our webshop.
Length: 100mm
Aplication: Radiator / Coolant / Air / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 1000mm
Aplication: Vaccum Lines & Coolant Overflow
Reinforcement: None
Temperature Rated: -60ºC to +180ºC
Material: Peroxide Cured 70 Shore Silicone
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Internal Diameter: 60mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
70mm to 51mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
BMC Complete Washing Kit
(Detergent + Spray)
This MMR Performance magnetic oil drain plug will protect the BMW 135i / 235i / 335i / 435i / M2 / M3 / M4 / M5 engines from the increased of metal particles into the oil pan by catching them via the magnetic section situated at the end of the plug.
This MMR Performance magnetic differential drain plug will protect your transmission from the increase of metal particles into the lubrification system by catching them via the magnetic section situated at the end of the drain plug.
Direct replacement for the OEM differential plug, this MMR plug is specifically designed for the BMW 35i / 40i / M2 / M3 / M4 or M5
– Direct bolt on
– Built in micro cat
– 100% stainless steel
– Compatible with any O2 sensors
– 90° bent structure for better access
Sabelt seat sliding runners are made to fit Sabelt and Sparco seats directly and to allow sliding movement backwards and forwards.
Reduce temperatures!
Technical Information:
Length: 15m
Width: 50mm
Direct heat resistance: 1800F / 1150 degree Celsius
Intermittent heat resistance: 2500F / 1400 degree Celsius
Colour: titanium
Eventuri panel air filters are direct replacement for OEM filters. Due of their construction and high flow design, these panel filters will easily and safely increase airflow through intake system !
Monitor your 0-60mph, 60-130mph, 100-200kmh, 1/4 mile, 1/2 mile performance, and more!
Technical features
P3 Digital gauges provide the highest level of OEM integration and color match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. Designed to be installed into driver side vent, the P3 Digital systems are available as 2 versions to choose.
The latest iteration of GFB’s feature-packed electronic boost controller now has the ability to monitor and display your engine’s air/fuel ratio in either Lambda or AFR. By connecting the analogue output of most wideband O2 controllers (i.e. Innovate LC-2, AEM UEGO etc, sold separately) to the G-Force III’s auxiliary input, you can toggle between boost pressure and air/fuel ratio display. Not only does this save you from having to install a separate AFR gauge in your car, it can also save your engine!
A stainless steel silencer with a built-in damper
Can height / width – 130×220 mm
Valve type – Electric Inlet
A stainless steel silencer with a built-in damper
Can height / width – 130×220 mm
Valve type – Vacuum
Downpipe BMW F07, F10, F11, G30 N63N, S63N, N63R
550i, 550ix, M5
2010-2017
407, 462, 560 bhp
Pipe diameter – 76 mm
– Direct bolt on
– Large volume carbon fiber air boxes
– Washable and reusable air filters
– Carbon fiber intake pipes
– Glossy finish
– Aggressive sound
– Mounting kit included
– Assembly instructions included
The BMW M5 F10 Eventuri intake was developed to give less restrictive airflow to the supercharger whilst maintaining low inlet temperatures. The 4.4L V8 engine bay becomes heat soaked very quickly so simply having an open cone system would result in better airflow but higher inlet temperatures. Eventuri therefore completely re-engineered the inlet system from the throttle body to the front grill with a highly efficient carbon fiber sealed system !