Showing all 34 results
For quotation please fill the budget form on our webshop.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them in to your requirements.
For quotation please fill the budget form on our webshop.
ap coilover kits offer the possibility to adjust drivers the desired lowering accurate to a millimeter for the sporty ambitioned driver. ap offer sporty handling and ideal performance in combination with the maximium lowering.
For quotation please fill the budget form on our webshop.
Length: 100mm
Aplication: Radiator / Coolant / Air / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 1000mm
Aplication: Vaccum Lines & Coolant Overflow
Reinforcement: None
Temperature Rated: -60ºC to +180ºC
Material: Peroxide Cured 70 Shore Silicone
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Internal Diameter: 60mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
70mm to 51mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
BMC Complete Washing Kit
(Detergent + Spray)
– Direct bolt on
– Built in micro cat
– 100% stainless steel
– Compatible with any O2 sensors
– 90° bent structure for better access
Sabelt seat sliding runners are made to fit Sabelt and Sparco seats directly and to allow sliding movement backwards and forwards.
Reduce temperatures!
Technical Information:
Length: 15m
Width: 50mm
Direct heat resistance: 1800F / 1150 degree Celsius
Intermittent heat resistance: 2500F / 1400 degree Celsius
Colour: titanium
Looking for a simple intake upgrade for your car ?
The warranty-friendly VWR High-Flow Panel Air Filters, replace the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam filter.
It’s really the best Panel Air Filter you can buy for your VAG
This Forge Motorsport inlet hose for Audi S4 / S5 B8 3.0 TFSI removes the ‘corrugated’ construction of the original hose with a larger smooth internal bore to improve engine efficiency.
Monitor your 0-60mph, 60-130mph, 100-200kmh, 1/4 mile, 1/2 mile performance, and more!
This Racingline Performance wheel studs and nuts kit allows you to replace the factory bolts for a stud and nut system. This kit, besides having a more modern esthetic, will makes wheels swap for track or winter much easier and faster than using OEM bolts.
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
P3 Digital gauges provide the highest level of OEM integration and color match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. Designed to be installed into driver side vent, the P3 Digital systems are available as 2 versions to choose.
The latest iteration of GFB’s feature-packed electronic boost controller now has the ability to monitor and display your engine’s air/fuel ratio in either Lambda or AFR. By connecting the analogue output of most wideband O2 controllers (i.e. Innovate LC-2, AEM UEGO etc, sold separately) to the G-Force III’s auxiliary input, you can toggle between boost pressure and air/fuel ratio display. Not only does this save you from having to install a separate AFR gauge in your car, it can also save your engine!
A stainless steel silencer with a built-in damper
Can height / width – 130×220 mm
Valve type – Electric Inlet
A stainless steel silencer with a built-in damper
Can height / width – 130×220 mm
Valve type – Vacuum
– clearence at top of piston 0.001-0.00015
– deviation of circularity max 0.001mm
– 370-450hb before rectification
– nitrided at depth of 0.15-0.25
– hardness of hv10-760-860 kgf/mm2 after nitriding
– 34mocr11 STAS 791-1988 special aged steel
Autotech is the premier manufacturer of fuel pump upgrades for the FSI engine because our kit offers the highest quality, solid engineering, and great value.
Our HPFP Kit can achieve flow rates 50% higher than the original pump, essentially removing pump limitations from the equation, even on high-end turbo upgrades.
Our HPFP kit continues to be the benchmark that imitators strive to reach. However, Autotech’s HPFP Kit is not easily duplicated.
Autotech is the premier manufacturer of fuel pump upgrades for the FSI engine because our kit offers the highest quality, solid engineering, and great value.
Our HPFP Kit can achieve flow rates 50% higher than the original pump, essentially removing pump limitations from the equation, even on high-end turbo upgrades.
Our HPFP kit continues to be the benchmark that imitators strive to reach. However, Autotech’s HPFP Kit is not easily duplicated.
The CTS pulley upgrade is larger diameter than stock and made from precision billet T66061 aluminum. It replaces the two-piece design of the stock pulley and also reduces the rotational mass of the crank, freeing up horsepower.
High quality CTS Turbo downpipes made with T304 stainless steel, mandrel bent and hand TIG welded 2.5″ / 63.5mm pipework. These downpipes fit between the catalysts and the OEM or aftermarket midpipes with no modifications required.
– Direct bolt on
– Large volume carbon fiber airbox
– Washable and reusable air filter
– Carbon fiber intake pipe
– Glossy finish
– Aggressive sound
– Mounting kit included
– Assembly instructions included
CTS Turbo has been dedicated to manufacturing performance parts for enthusiasts by enthusiasts since its inception. Near a full range of performance products, CTS Turbo offers some great exhausts systems made from high quality T304 stainless steel, TIG welded with polished tailpipes featuring the CTS Turbo engraved logo. Those exhausts provide aggressive sound under hard driving and subtle when cruising to mix confort and fun ! This system is direct remplacement for OEM catback and includes all hardware for quick and easy installation.