Latest Products
-
WATER PUMP, ENGINE COOLING THERMAL MANAGEMENT MODULE FOR AUDI S3 8V / TT 8S / GOLF 7 GTI / GOLF 7 R / LEON 5F CUPRA 1.8/2.0 TSI EA888.3 MQB
€ 350.00 TAX included
-
TIMING CHAIN KIT FOR 2.0 TFSI EA113
€ 130.00 TAX included
-
CAM FOLLOWER FOR 2.0 TFSI EA113
€ 30.00 TAX included
-
AP SPORTFAHRWERKE COILOVER KIT
-
ST SUSPENSIONS COILOVER KIT
-
- Street Comfort
Products to improve driving and operating comfort - Street Performance
Coilovers for an individual look and to improve driving dynamics on the road - Track Performance
Clubsport & racing suspensions to achieve the fastest possible lap time
For quotation please fill the budget form on our webshop.
- Street Comfort
-
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them in to your requirements.
For quotation please fill the budget form on our webshop.
-
ap coilover kits offer the possibility to adjust drivers the desired lowering accurate to a millimeter for the sporty ambitioned driver. ap offer sporty handling and ideal performance in combination with the maximium lowering.
For quotation please fill the budget form on our webshop.
-
Length: 100mm
Aplication: Radiator / Coolant / Air / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 1000mm
Aplication: Vaccum Lines & Coolant Overflow
Reinforcement: None
Temperature Rated: -60ºC to +180ºC
Material: Peroxide Cured 70 Shore Silicone -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Internal Diameter: 60mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
70mm to 51mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
BMC Complete Washing Kit
(Detergent + Spray)
-
Stripping weight out of your track car? Prefer that clean, uncluttered look without the rear wiper? Then this Rear Wiper Delete kit is for you….
-
This Racingline Performance magnetic fill and drain plugs kit for Haldex will protect your transmission from the increased of metal particles into the Haldex lubrification system by catching them via the magnetic section situated at the end of the drain plug. Direct replacement for the OEM plugs.
-
This Racingline Performance magnetic fill and drain plugs kit for the front differential will protect your transmission from the increased of metal particles into the lubrification system by catching them via the magnetic section situated at the end of the drain plug.
-
– Direct bolt on
– Built in micro cat
– 100% stainless steel
– Compatible with any O2 sensors
– 90° bent structure for better access -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
Sabelt seat sliding runners are made to fit Sabelt and Sparco seats directly and to allow sliding movement backwards and forwards.
-
Reduce temperatures!
- Thermal insulation of manifold/exhaust components
- Reduces engine bay temperature
- 15m x 50mm width (1.6mm thick)
- Material : titanium finish fiberglass
-
This kit of two Racingline Performance plates allows to perfectly align the driveshaft bearing of the Golf 7 R / 8 R, S3 8V / 8Y and TT 8S equipped with the Quattro transmission, in order to limit lateral movements leading well often to the rupture of the propshaft bearing on high powered vehicles.
-
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
Looking for a simple intake upgrade for your car ? The warranty-friendly Racingline high-flow panel air filters, replace the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam filter. It’s really the best panel air filter you can buy for your Audi RS3 8V / TTRS 8S
-
This Forge Motorsport silicone inlet hose for the Audi RS3 8V / 8.5V takes place between the intake pipe and the turbo inlet pipe to suport high temps and pressures but also to to bring some great looking to the engine bay.
-
Technical Information:
Length: 15m
Width: 50mm
Direct heat resistance: 1800F / 1150 degree Celsius
Intermittent heat resistance: 2500F / 1400 degree Celsius
Colour: titanium -
This Racingline billet brake fluid cap is all about detailing, representing stylish detail for your car engine bay, that’s a great upgrade for the oem plastic cap.
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised
-Laser etched logo -
This Racingline billet MQB expension cap is all about detailing, representing stylish detail for your 1.4 TFSI / 2.0 TFSI / 2.5 TFSI / 3.0 TFSI / 4.0 TFSI TFSI engine bay, that’s a great upgrade for the oem plastic cap.
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised
-Laser etched logo
-Made in UK -
This Racingline black anodized aluminium billet oil filter housing for DSG 6 / DSG 7 is designed to solve the common issues of the OEM plastic made housing . This direct bolt on accessory will bring your engine bay a great looking and your gearbox a better reliability.
-
The installation of a Racingline big brake kit can be problematic due to the lack of space available behind the wheels… In order to provide a reliable and efficient solution, Racingline offers these 5mm thick hub adaptors, designed for perfect fitment over the Racingline discs for your car.
-
This Racingline billet fuel cap is all about detailing, representing stylish detail, that’s a great replacement for the OEM plastic cap.
-Direct bolt on
-T6061 aluminium CNC
-Gloss black anodised -
Monitor your 0-60mph, 60-130mph, 100-200kmh, 1/4 mile, 1/2 mile performance, and more!
-
This Racingline Performance wheel studs and nuts kit allows you to replace the factory bolts for a stud and nut system. This kit, besides having a more modern esthetic, will makes wheels swap for track or winter much easier and faster than using OEM bolts.
-
This Racingline rear lower tunnel brace, designed for the MQB and MQB-Evo platforms such as the Golf 7 / Golf 8, Leon 3, Octavia 5E / NX or S3 8V / 8Y is made of high quality 6061-T6 aluminum with a discreet and elegant black finish. Fitting without any modifications, this rear lower bar will bring additional rigidity and agility to the MQB chassis while increasing clearance for large diameter exhaust.
-
The Racingline Performance paddle shifts, available in titanium silver or black finish, are a direct replacement for your OEM RS3 8V / TTRS 8S paddles. Once the original paddle shifts removed, the Racingline ones can be installed without any modifications to enhance your interior look and efficiency.
-
This set of 5 Forge Motorsport boost / intercooler silicone hoses for Audi RS3 8V and Audi TTRS MK3 replaces the OEM turbo outlet, intercooler inlet / outlet, and throttle body inlet hoses.
-
These Racingline Performance adjustable front drop end links for your car are designed to allow you to easily correct the sway bar geometry of your lowered car. Available with 2 different length to select, 250mm for standard or up to -30mm height and 200mm for lower set up, these high quality drop links improve cornering and steering responses.
-
P3 Digital gauges provide the highest level of OEM integration and color match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. Designed to be installed into driver side vent, the P3 Digital systems are available as 2 versions to choose.
-
This Racingline Performance sport spring kit is the best performance / design / confort ratio for your Audi S3 / RS3 8V Saloon or Sportback. It will lower your car by 20 / 30 mm in order to preserve the wheel travel needed to keep the usability of the standard car and will perfectly match with OEM or aftermarket shocks !
-
The latest iteration of GFB’s feature-packed electronic boost controller now has the ability to monitor and display your engine’s air/fuel ratio in either Lambda or AFR. By connecting the analogue output of most wideband O2 controllers (i.e. Innovate LC-2, AEM UEGO etc, sold separately) to the G-Force III’s auxiliary input, you can toggle between boost pressure and air/fuel ratio display. Not only does this save you from having to install a separate AFR gauge in your car, it can also save your engine!
-
A stainless steel silencer with a built-in damper
Can height / width – 130×220 mm
Valve type – Electric Inlet -
A stainless steel silencer with a built-in damper
Can height / width – 130×220 mm
Valve type – Vacuum -
– clearence at top of piston 0.001-0.00015
– deviation of circularity max 0.001mm
– 370-450hb before rectification
– nitrided at depth of 0.15-0.25
– hardness of hv10-760-860 kgf/mm2 after nitriding
– 34mocr11 STAS 791-1988 special aged steel -
Autotech is the premier manufacturer of fuel pump upgrades for the FSI engine because our kit offers the highest quality, solid engineering, and great value.
Our HPFP Kit can achieve flow rates 50% higher than the original pump, essentially removing pump limitations from the equation, even on high-end turbo upgrades.
Our HPFP kit continues to be the benchmark that imitators strive to reach. However, Autotech’s HPFP Kit is not easily duplicated.
-
Racingline R360 Gunmetal wheels are available with 8.5 x 19 with +44 offset to bring great design and efficiency to VAG group A5 and MQb plateformes with 5×112 bolt pattern and 57.1 bore. Proudly made in the UK, the light weight of the R360 wheel makes a useful contribution to the ride, handling and responses of any car through reducing the all-important unsprung weight.
-
This Racingline X-shaped rear strut bar for Audi A3 8V / S3 8V / RS3 8V is made from carbon fiber tubing that combines rigidity, weight reduction and style. Installed without modifications, this bar can be easily removed and will give your car additional rigidity and agility while taking up the minimum of space in your boot!
-
Downpipe AUDI RS3 8V
2.5 TFSI
2014-
367 bhp
QUATTRO
Pipe diameter– 63,5 mm -
– much higher and constant pressures
– much better fuel supply
– in-house pistons and cylinders
– custom latest generation alloys
– special hardening process
– micron grinding process
– diamond-like carbon (DLC) coating
Showing 1–50 of 59 results