Latest Products
-
WALBRO MOTORSPORT E85 FUEL PUMP - 450 L/H
€ 182.00 TAX included
-
ALPHA COMPETITION INLET HOSE FOR AUDI S3 8V / TT 8S / GOLF 7 GTI / R / LEON 5F CUPRA
€ 64.99 TAX included
-
RM MOTORS TRANSVERSE STRAIGHT-THROUGH SUPER FLOW PERFORMANCE MUFFLER
€ 219.00 – € 227.80 TAX included
-
WATER PUMP, ENGINE COOLING THERMAL MANAGEMENT MODULE FOR AUDI S3 8V / TT 8S / GOLF 7 GTI / GOLF 7 R / LEON 5F CUPRA 1.8/2.0 TSI EA888.3 MQB
€ 350.00 TAX included
-
TIMING CHAIN KIT FOR 2.0 TFSI EA113
€ 130.00 TAX included
-
- Street Comfort
Products to improve driving and operating comfort - Street Performance
Coilovers for an individual look and to improve driving dynamics on the road - Track Performance
Clubsport & racing suspensions to achieve the fastest possible lap time
For quotation please fill the budget form on our webshop.
- Street Comfort
-
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them in to your requirements.
For quotation please fill the budget form on our webshop.
-
ap coilover kits offer the possibility to adjust drivers the desired lowering accurate to a millimeter for the sporty ambitioned driver. ap offer sporty handling and ideal performance in combination with the maximium lowering.
For quotation please fill the budget form on our webshop.
-
Length: 100mm
Aplication: Radiator / Coolant / Air / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 1000mm
Aplication: Vaccum Lines & Coolant Overflow
Reinforcement: None
Temperature Rated: -60ºC to +180ºC
Material: Peroxide Cured 70 Shore Silicone -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Internal Diameter: 60mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
70mm to 51mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC -
BMC Complete Washing Kit
(Detergent + Spray)
-
This Racingline Performance magnetic fill and drain plugs kit for Haldex will protect your transmission from the increased of metal particles into the Haldex lubrification system by catching them via the magnetic section situated at the end of the drain plug. Direct replacement for the OEM plugs.
-
– Direct bolt on
– Built in micro cat
– 100% stainless steel
– Compatible with any O2 sensors
– 90° bent structure for better access -
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
Sabelt seat sliding runners are made to fit Sabelt and Sparco seats directly and to allow sliding movement backwards and forwards.
-
Reduce temperatures!
- Thermal insulation of manifold/exhaust components
- Reduces engine bay temperature
- 15m x 50mm width (1.6mm thick)
- Material : titanium finish fiberglass
-
This Forge Motorsport silicone inlet hose for the Audi RS3 8V / 8.5V takes place between the intake pipe and the turbo inlet pipe to suport high temps and pressures but also to to bring some great looking to the engine bay.
-
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
Technical Information:
Length: 15m
Width: 50mm
Direct heat resistance: 1800F / 1150 degree Celsius
Intermittent heat resistance: 2500F / 1400 degree Celsius
Colour: titanium -
Technical features
- Panel
- Outside Width 222mm
- Outside Length 347mm
-
- For optimum performance of the upgrade pump
- Control unit is replaced plug & play
- no changes to series software necessary
- high quality
-
Monitor your 0-60mph, 60-130mph, 100-200kmh, 1/4 mile, 1/2 mile performance, and more!
-
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness -
This large diameter outlet pipe from CTS Turbo, fitting between the turbo and the intercooler on 2.5 TFSI Evo engines, has a regular 63mm diameter to eliminate the restrictions caused by the OEM plastic pipe. Direct bolt on upgrade, the outlet pipe allow a better boost flow on vehicles with increased turbo pressures.
-
This Racingline rear lower tunnel brace, designed for the MQB and MQB-Evo platforms such as the Golf 7 / Golf 8, Leon 3, Octavia 5E / NX or S3 8V / 8Y is made of high quality 6061-T6 aluminum with a discreet and elegant black finish. Fitting without any modifications, this rear lower bar will bring additional rigidity and agility to the MQB chassis while increasing clearance for large diameter exhaust.
-
The Forge Motorsport aluminium inlet pipe for RS3 8V FL and TTRS Mk3 removes the restrictive construction of the original plastic hose. With a large 89mm diameter (70mm for OEM), it improves air flow and provides up to 8hp.
-
This CTS Turbo intake pipe is a simple and affordable evolution designed specifically for the 2.5 TFSI EVO engine of the Audi RS3 8V facelift and TTRS Mk3. With a larger volume and an aluminium structure, this 101mm tube will significantly increase airflow from the stock airbox to any 101mm turbo inlet.
-
This CTS Turbo intake pipe is an easy and affordable uprade for the Audi RS3 8V and TTRS Mk3 facelift versions. With a larger internal diameter, a monobloc aluminum structure and a small radius bend, this 76mm pipe will considerably increase airflows from the OEM airbox.
-
This Forge Motorsport silcone inlet hose for Audi RS3 8V and TTRS 8S fits as direct replacement for the OEM elbow between the turbocharger and the intake pipe. Made from high quality multi layer silicone and with 60% more volume, this inlet can be purchased as compatible with OEM turbo OR TTE625 OR TTE700.
-
This Racingline lower front brace, designed for the MQB and MQB-Evo platforms such as the A3 8V / 8Y, Golf 7 GTI , Golf 8 GTI, Leon 3 or Octavia 5E / NX is made of high quality 6061-T6 aluminum with a discreet and elegant black finish. Fitting without any modifications, this front underbody brace will bring additional rigidity and agility to the MQB / Evo chassis on the track and on the road.
– Direct bolt on
– 6061-T6 aluminium made
– Glossy black finish -
The latest iteration of GFB’s feature-packed electronic boost controller now has the ability to monitor and display your engine’s air/fuel ratio in either Lambda or AFR. By connecting the analogue output of most wideband O2 controllers (i.e. Innovate LC-2, AEM UEGO etc, sold separately) to the G-Force III’s auxiliary input, you can toggle between boost pressure and air/fuel ratio display. Not only does this save you from having to install a separate AFR gauge in your car, it can also save your engine!
-
This large volume turbo inlet pipe from CTS Turbo connects the turbo to the intake pipe on the DAZA and DWNA engine found in RS3 8V Facelift and TTRS mk3. with a 78% increase in volume over OEM inlet, this 4″ / 101mm pipe will provide increased air flow to the turbo on both stock or highly modified engines.
-
A stainless steel silencer with a built-in damper
Can height / width – 130×220 mm
Valve type – Electric Inlet -
A stainless steel silencer with a built-in damper
Can height / width – 130×220 mm
Valve type – Vacuum -
The APR Carbon Fiber Intake System is an attractive high-performance upgrade designed to increase performance by letting the engine breathe more freely.
-
Dimensions stock Intercooler:
640mm x 163mm x 80mm
V=8,3 Liter
A=1043 cm²Dimensions WAGNERTUNING intercooler:
660mm x 180mm x 110mm
V=13,07 Liter
A=1188 cm² -
Direct replacement for the OEM components, this Wagner Tuning carbon fiber intake kit for Audi RS3 8V Facelift and TTRS 8S increases by 32% the 2.5 TFSI intake airflow ! With a real show design, this intake features a large bore 3.5″ / 90mm intake pipe and a spécific airbox lid, both made from high glossy finish carbon fiber.
-
This APR turbo inlet kit consists of a 4″ diameter forged aluminium inlet elbow and a 4″ carbon fiber intake pipe, all of which fits, without any modifications, between the turbo and the airbox of the 2.5 TFSI EVO engines, equipping among others the Audi RS3 8.5V and TTRS 8S. With a high-gloss finish and 45% more volume than OEM, this kit will provide the necessary airflow for any type of setup.
-
– Direct bolt on
– Measured gain on standard engine : 9hp
– Large volume carbon fiber airbox
– Washable and reusable air filter
– Carbon fiber intake pipe
– Glossy finish
– Aggressive sound
– Mounting kit included
– Assembly instructions included -
OEM intercooler: cooling surface 832cm² / charge air volume 9,15L
WT EVO 2 Competition: cooling surface 1560cm² / charge air volume 15,6L
-
OEM intercooler:
cooling surface 1024cm²
charge-air-volume 8,2LWT EVO 3 Competition:
cooling surface 1890cm²
charge-air-volume 16,5L -
This Carbon Fiber Cold Air Intake from Eventuri is a real beauty and fits the Audi F3 RSQ3. This intake upgrade provides an aerodynamic and efficient airflow to the air filter and from the air filter to the turbo.