Showing all 33 results
For quotation please fill the budget form on our webshop.
ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them in to your requirements.
For quotation please fill the budget form on our webshop.
ap coilover kits offer the possibility to adjust drivers the desired lowering accurate to a millimeter for the sporty ambitioned driver. ap offer sporty handling and ideal performance in combination with the maximium lowering.
For quotation please fill the budget form on our webshop.
Length: 100mm
Aplication: Radiator / Coolant / Air / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 1000mm
Aplication: Vaccum Lines & Coolant Overflow
Reinforcement: None
Temperature Rated: -60ºC to +180ºC
Material: Peroxide Cured 70 Shore Silicone
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Internal Diameter: 60mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
Due to this blanking plate the hot exhaust gases no longer reach the intake manifold. When the oil from the crankcase breather mixes up with the hot exhaust gases from the exhaust gas recirculation, it will creat a few millimeters thick oil soot film in the intake manifold to the EGR valve, reducing the port diameter significantly. This reduces engine power and increased fuel consumption.
Due to this blanking plate the hot exhaust gases no longer reach the intake manifold. When the oil from the crankcase breather mixes up with the hot exhaust gases from the exhaust gas recirculation, it will creat a few millimeters thick oil soot film in the intake manifold to the EGR valve, reducing the port diameter significantly. This reduces engine power and increased fuel consumption.
Due to this blanking plate the hot exhaust gases no longer reach the intake manifold. When the oil from the crankcase breather mixes up with the hot exhaust gases from the exhaust gas recirculation, it will creat a few millimeters thick oil soot film in the intake manifold to the EGR valve, reducing the port diameter significantly. This reduces engine power and increased fuel consumption.
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
70mm to 51mm
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
Length: 100mm
Aplication: Radiator / Coolant / Air Hose / Water
Reinforcement: Polyester
Temperature Rated: -60ºC to +180ºC
BMC Complete Washing Kit
(Detergent + Spray)
– Direct bolt on
– Built in micro cat
– 100% stainless steel
– Compatible with any O2 sensors
– 90° bent structure for better access
Sabelt seat sliding runners are made to fit Sabelt and Sparco seats directly and to allow sliding movement backwards and forwards.
Reduce temperatures!
– Prolonged tyre life
– Improved performance
– Increase safety
– Greater cost-effectiveness
Technical Information:
Length: 15m
Width: 50mm
Direct heat resistance: 1800F / 1150 degree Celsius
Intermittent heat resistance: 2500F / 1400 degree Celsius
Colour: titanium
Monitor your 0-60mph, 60-130mph, 100-200kmh, 1/4 mile, 1/2 mile performance, and more!
Downpipe AUDI A6 C6
2.7, 3.0 TDI
2005-2011
180, 190, 224, 233, 240 bhp
Quattro aut.
Pipe diameter – 76 mm
This Racingline Performance wheel studs and nuts kit allows you to replace the factory bolts for a stud and nut system. This kit, besides having a more modern esthetic, will makes wheels swap for track or winter much easier and faster than using OEM bolts.
Downpipe AUDI A6 C6 2.7, 3.0 TDI
2.7, 3.0 TDI
2005-2011
180, 190, 224, 233, 240 bhp
Quattro Aut.
Pipe diameter – 76 mm
Pipe diameter at the point of the connection with a middle section – 58 mm
Downpipe AUDI A6 C6
2.7, 3.0 TDI
2005-2011
180, 190, 224, 233, 240 bhp
Quattro aut.
Pipe diameter – 76 mm
The latest iteration of GFB’s feature-packed electronic boost controller now has the ability to monitor and display your engine’s air/fuel ratio in either Lambda or AFR. By connecting the analogue output of most wideband O2 controllers (i.e. Innovate LC-2, AEM UEGO etc, sold separately) to the G-Force III’s auxiliary input, you can toggle between boost pressure and air/fuel ratio display. Not only does this save you from having to install a separate AFR gauge in your car, it can also save your engine!
The PROTRACK ONE is one of the lightest TÜV approved cast wheels on the market. The perfect rim for the hot hatches.
A stainless steel silencer with a built-in damper
Can height / width – 130×220 mm
Valve type – Electric Inlet
A stainless steel silencer with a built-in damper
Can height / width – 130×220 mm
Valve type – Vacuum
The PROTRACK ONE is one of the lightest TÜV approved cast wheels on the market. The perfect rim for the hot hatches.
Downpipe AUDI A6 C6
2.7, 3.0 TDI
2005-2011
180, 190, 233, 240 bhp
Quattro aut.
Pipe diameter – 76 mm